Note: No Frequency limitation. Sensor can be switched to other frequency plans at any time.
This data logger can collect data from multiple sensors and transfer the data through LoRaWAN network. If you have deployed sensors that are not based on the LoRaWAN network, then with our LoRaWAN data logger, you can change them into LoRaWAN-based sensors and use the LoRaWAN network to transfer data. You can easily enjoy the advantages of LoRaWAN technology such as low power consumption and long transmission range, without affording the cost of changing the sensors you are using.
The SenseCAP S2100 Data Logger connects the sensor, collects the Data, and uploads it to the LoRaWAN gateway. It can support up to 100+ industrial sensors and 100+ grove sensors including various sensor types such as Analog/RS485/GPIO. It has a built-in battery and an IP66 enclosure, optimized for outdoor use cases that need reliable data collected over years. With Bluetooth 5.0 for easy configuration and firmware upgrade, It is also compatible with a wide range of frequencies (863-928MHz), different gateways, and LoRaWAN network servers.
10 years of battery life and can cover a transmission range of 2km in urban scenes and 10km in line of sight scenes
Industrial design: -40℃ ~ 85℃ operating temperature and IP66 rating
Over the Air Configuration in 1 min: scan the QR code on the device and just in a few clicks to choose the frequencies you want, all the configuration can be done via Bluetooth.
Easily get data, no clunky software interfaces: temperature and humidity data can smoothly be sent to your phone and cloud servers or other IoT data management platforms you’re using.
Powerful supported SenseCAP APP: you can set threshold value (just focus on the data you need take action for), time intervals (improve the battery efficiency), and set alarms if data is out of the safe range.
Flexibly compatible with various LoRaWAN gateways: can be used with different types of LoRaWAN gateways and compatible with multiple LoRaWAN Network Servers (Helium, TTN) to enable our sensor quickly join in your current LoRaWAN networks.